datasheet | october 2012 fiber optics | rev 2012.10 information contained herein is deemed reliable and accurate as of the issue date. emcore reserves the right to change the desi gn or specification at any time without notice. applications fiber optical protection switching redundant ring architectures fttx networks features automatic, manual and remote switching auto-switching time less than 25ms snmp control interface front panel led indicators 1 ru rack-mount enclosure with choice of ac or dc power supply the eos-6000 optical a/b switch is a high-performance solution for network protection and optical redundancy. packaged in convenient 1ru housing, this line of optical switches provides an automatic or manual fiber switching function to protect the network from inadvertent service outages due to up-stream optical signal degradation. each fiber?s optical signal power level is continuously monitored, as is an adjustable optical trip threshold for each channel. if the primary fiber?s optical signal power level falls below the desired optical trip threshold, the unit automatically switches to the secondary fiber, thus eliminating the need for intervention of a system operator. the eos-6000 is capable of manual switching or can be switched remotely via snmp adding optical protection to many system applications. the eos-6000 series is designed as a low power, cost-effective, high-performance switching solution for applications that demand reliable and rapid response to changing network conditions figure 1: redundant path configuration for catv broadcast optical characteristics eos-6000 optical a/b switch ? to wdm & pons medallion 6000 catv tx (main) medallion 6000 catv tx (backup) main eos-6000 optical switch backup nmoa8100/8200 edfa rf in rf in property units min. typ. max. operating wave length nm 1310 +/- 10 or 1550 +/- 20 insertion loss db 1.0 1.3 return loss db 55 60 polarization dependent loss db 0.06 0.1 repeatability db +/-0.01 +/-0.02 isolation db -60 -50 input optical power dbm 24 switching time ms 25
datasheet | october 2012 fiber optics | rev 2012.10 information contained herein is deemed reliable and accurate as of the issue date. emcore reserves the right to change the desi gn or specification at any time without notice. general and mechanical specifications property requirement comments switching threshold 20 db range ? see ordering info settable within range switching mode auto, manual, remote optical connector sc/apc other styles available monitoring interfaces 100 base-t ethernet rear panel rs-232 interface led indicators snmp v1 reserved for factory use power, main, backup, and output indicators operating temperature 0 ? c to 50 ? c storage temperature -25 ? c to 65 ? c agency listings fcc: subpart b. part 15, class ?a? unintentional radiators power consumption 5w maximum supply range (vdc) (vac) 85 to 240 vac, 50/60 hz 36 - 72 vdc dimensions 430x300x44mm model number information (note 1) 6000 ? 0s - operating wavelenghth optics power supply switching threshold range emcore logo 3 ? 1310nm 1 ? sc/apc 1 ? ac 1 ? [-30, -10] dbm 0 ? no 5 ? 1550nm 2 ? fc/apc 2 ? dc 2 ? [-20, 0] dbm 2 ? yes 3 ? sc/upc 3 ? [-10, 10] dbm 4 ? fc/upc 4 ? [0, 20] dbm 5 ? lc/upc 6- lc/apc note 1: not all configurations are available - contact factory. example: 6000-0s5-1232 1550nm, sc/apc connectors, dc power supply, -10 to + 10 dbm input range, emcore logo. eos-6000 optical a/b switch
|
